# Settings file for the nvidia driver and accelerant## This file should be moved to the directory# ~/config/settings/kernel/drivers/## nvidia driver parameters:#accelerant "nvidia.accelerant" # if enabled selects accelerant filename to be used#primary "10de_0110_010000" # if enabled selects device to be used as primary device ('hack')dumprom false # dump bios rom to file (in home folder)# nvidia.accelerant parameters:usebios true # if true rely on bios to coldstart the card#memory 2 # in MB, override builtin memory size detectionhardcursor true # if true use on-chip cursor capabilities#logmask 0x00000000 # nothing logged, is default#logmask 0x08000604 # log overlay use in full to file (in home folder)#logmask 0xffffffff # log everything to file (in home folder)switchhead false # switch head assignment (dualhead cards only)force_pci false # block AGP mode use if true (AGP cards only)dma_acc true # if true enable DMA cmd fetching for 2D acc (instead of using PIO)#tv_output 0 # disabled or 0 = autodetect, 1 = Y/C (and CVBS if possible), 2 = CVBSforce_sync false # if true forces 3D rendering to be synchronized to the vertical retraceforce_ws false # if true forces widescreen type detection for all connected screensblock_acc false # if true disables the acceleration engine# WARNING: tweak alert! modify stuff below on your own risk...unhide_fw false # if true 'unhide' cards AGP fastwrite support on cards that hide itpgm_panel false # if false don't program DVI and laptop panel pixelclocks (refreshrates)vga_on_tv false # if true enables VGA output on the head outputting to TV#gpu_clk 150 # in Mhz, (tries to) override default GPU clockspeed (be carefull!!!)#ram_clk 150 # in Mhz, (tries to) override default cardRAM clockspeed (be carefull!!!)check_edid true # if true blocks resolutions beyond monitor(s) capabilities#--------- that's all.#logmask setup info:#log level select:#logmask 0x0000000x # lowest digit: bitmask to select logging level.#log modules select:#logmask 0xxxxxxxx0 # highest 7 digits: bitmask to select individual modules to log.#log levels: (3D add-on adheres to this setup, 2D add-on still has to tuned)#logmask 0x00000001 # log rendering#logmask 0x00000002 # log state#logmask 0x00000004 # log experimental#logmask 0x00000008 # log errors#log modules:#logmask 0x00000100 # engine: agp#logmask 0x00000200 # engine: bes#logmask 0x00000400 # overlay#logmask 0x00000800 # engine: support#logmask 0x00001000 # engine: dac2#logmask 0x00002000 # engine: info#logmask 0x00004000 # engine: i2c#logmask 0x00008000 # engine: general#logmask 0x00010000 # engine: dac1#logmask 0x00020000 # engine: crtc2#logmask 0x00040000 # engine: crtc1#logmask 0x00080000 # engine: acc (both PIO and DMA)#logmask 0x00100000 # engine: brooktree tv#logmask 0x00200000 # set displaymode#logmask 0x00400000 # propose displaymode#logmask 0x00800000 # init accelerant#logmask 0x01000000 # get timing constraints#logmask 0x02000000 # get mode info#logmask 0x04000000 # get device info#logmask 0x08000000 # get accelerant hook#logmask 0x10000000 # engine management#logmask 0x20000000 # cursor#logmask 0x40000000 # 2D acceleration#logmask 0x80000000 # 3D acceleration