haiku.git

/*
	Copyright (c) 2002, Thomas Kurschel


	Part of Radeon kernel driver

	BIOS detection and retrieval of vital data

	Most of this data should be gathered directly,
	especially monitor detection should be done on
	demand so not all monitors need to be connected
	during boot
*/

#include "radeon_driver.h"
#include "mmio.h"
#include "bios_regs.h"
#include "config_regs.h"
#include "memcntrl_regs.h"
#include "buscntrl_regs.h"
#include "fp_regs.h"
#include "crtc_regs.h"
#include "ddc_regs.h"
#include "radeon_bios.h"
#include "utils.h"

#include <stdio.h>
#include <string.h>

#define get_pci(o, s) (*pci_bus->read_pci_config)(pcii->bus, pcii->device, pcii->function, (o), (s))

#define RADEON_BIOS8(v) 	 (di->rom.rom_ptr[v])
#define RADEON_BIOS16(v) 	((di->rom.rom_ptr[v]) | \
				(di->rom.rom_ptr[(v) + 1] << 8))
#define RADEON_BIOS32(v) 	((di->rom.rom_ptr[v]) | \
				(di->rom.rom_ptr[(v) + 1] << 8) | \
				(di->rom.rom_ptr[(v) + 2] << 16) | \
				(di->rom.rom_ptr[(v) + 3] << 24))

static const char ati_rom_sig[] = "761295520";

static const tmds_pll_info default_tmds_pll[14][4] =
{
    {{12000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},			// r100
    {{12000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},			// rv100
    {{0, 0}, {0, 0}, {0, 0}, {0, 0}},						// rs100
    {{15000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},			// rv200
    {{12000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},			// rs200
    {{15000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},			// r200
    {{15500, 0x81b}, {0xffffffff, 0x83f}, {0, 0}, {0, 0}},			// rv250
    {{0, 0}, {0, 0}, {0, 0}, {0, 0}},						// rs300
    {{13000, 0x400f4}, {15000, 0x400f7}, {0xffffffff, 0x40111}, {0, 0}}, 	// rv280
    {{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}},				// r300
    {{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}},				// r350
    {{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}},			// rv350
    {{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}},			// rv380
    {{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}},				// r420
};


// find address of ROM;
// this code is really nasty as maintaining the radeon signatures
// is almost impossible (the signatures provided by ATI are always out-dated);
// further, if there is more then one card built into the computer, we
// may detect the wrong BIOS!
// we have two possible solutions:
// 1. use the PCI location as stored in BIOS
// 2. verify the IO-base address as stored in BIOS
// I have no clue how these values are _written_ into the BIOS, and
// unfortunately, every BIOS does the detection in a different way,
// so I'm not sure which is the _right_ way of doing it
static char *Radeon_FindRom( rom_info *ri )
{
	uint32 segstart;
	uint8 *rom_base;
	char *rom;
	int i;

	for( segstart = 0x000c0000; segstart < 0x000f0000; segstart += 0x00001000 ) {
		bool found = false;

		// find ROM
		rom_base = ri->bios_ptr + segstart - 0xc0000;

		if( rom_base[0] != 0x55 || rom_base[1] != 0xaa )
			continue;

		// find signature of ATI
		rom = rom_base;

		found = false;

		for( i = 0; i < 128 - strlen( ati_rom_sig ); i++ ) {
			if( ati_rom_sig[0] == rom_base[i] ) {
				if( strncmp(ati_rom_sig, rom_base + i, strlen( ati_rom_sig )) == 0 ) {
					found = true;
					break;
				}
			}
		}

		if( !found )
			continue;

		// EK don't bother looking for signiture now, due to lack of consistancy.

		SHOW_INFO( 2, "found ROM @0x%" B_PRIx32, segstart );
		return rom_base;
	}

	SHOW_INFO0( 2, "no ROM found" );
	return NULL;
}


// PLL info is stored in ROM, probably it's too easy to replace it
// and thus they produce cards with different timings
static void Radeon_GetPLLInfo( device_info *di )
{
	uint8 *bios_header;
	uint8 *tmp;
	PLL_BLOCK pll, *pll_info;

	bios_header = di->rom.rom_ptr + *(uint16 *)(di->rom.rom_ptr + 0x48);
	pll_info = (PLL_BLOCK *)(di->rom.rom_ptr + *(uint16 *)(bios_header + 0x30));

	// determine type of ROM

	tmp = bios_header + 4;

    if ((	*tmp 	== 'A'
   		&& *(tmp+1) == 'T'
   		&& *(tmp+2) == 'O'
   		&& *(tmp+3) == 'M'
   		)
   		||
   		(	*tmp	== 'M'
   		&& *(tmp+1) == 'O'
   		&& *(tmp+2) == 'T'
   		&& *(tmp+3) == 'A'
   		))
	{
		int bios_header, master_data_start, pll_start;
		di->is_atombios = true;

		bios_header 	  	 = RADEON_BIOS16(0x48);
		master_data_start 	 = RADEON_BIOS16(bios_header + 32);
		pll_start 		  	 = RADEON_BIOS16(master_data_start + 12);

		di->pll.ref_div 	 = 0;
		di->pll.max_pll_freq = RADEON_BIOS16(pll_start + 32);
		di->pll.xclk 		 = RADEON_BIOS16(pll_start + 72);
		di->pll.min_pll_freq = RADEON_BIOS16(pll_start + 78);
		di->pll.ref_freq 	 = RADEON_BIOS16(pll_start + 82);

		SHOW_INFO( 2, "TESTING "
			"ref_clk=%" B_PRIu32 ", ref_div=%" B_PRIu32 ", xclk=%" B_PRIu32 ", "
			"min_freq=%" B_PRIu32 ", max_freq=%" B_PRIu32 " from ATOM Bios",
			di->pll.ref_freq, di->pll.ref_div, di->pll.xclk,
			di->pll.min_pll_freq, di->pll.max_pll_freq );

		// Unused by beos driver so it appears...
		// info->sclk = RADEON_BIOS32(pll_info_block + 8) / 100.0;
		// info->mclk = RADEON_BIOS32(pll_info_block + 12) / 100.0;
		// if (info->sclk == 0) info->sclk = 200;
		// if (info->mclk == 0) info->mclk = 200;

	}
    else
	{
		di->is_atombios = false;

		memcpy( &pll, pll_info, sizeof( pll ));

		di->pll.xclk 		 = (uint32)pll.XCLK;
		di->pll.ref_freq 	 = (uint32)pll.PCLK_ref_freq;
		di->pll.ref_div 	 = (uint32)pll.PCLK_ref_divider;
		di->pll.min_pll_freq = pll.PCLK_min_freq;
		di->pll.max_pll_freq = pll.PCLK_max_freq;

		SHOW_INFO( 2,
			"ref_clk=%" B_PRIu32 ", ref_div=%" B_PRIu32 ", xclk=%" B_PRIu32 ", "
			"min_freq=%" B_PRIu32 ", max_freq=%" B_PRIu32 " from Legacy BIOS",
			di->pll.ref_freq, di->pll.ref_div, di->pll.xclk,
			di->pll.min_pll_freq, di->pll.max_pll_freq );

	}

}

/*
const char *Mon2Str[] = {
	"N/C",
	"CRT",
	"CRT",
	"Laptop flatpanel",
	"DVI (flatpanel)",
	"secondary DVI (flatpanel) - unsupported",
	"Composite TV",
	"S-Video out"
};*/

/*
// ask BIOS what kind of monitor is connected to each port
static void Radeon_GetMonType( device_info *di )
{
	unsigned int tmp;

	SHOW_FLOW0( 3, "" );

	di->disp_type[0] = di->disp_type[1] = dt_none;

	if (di->has_crtc2) {
		tmp = INREG( di->regs, RADEON_BIOS_4_SCRATCH );

		// ordering of "if"s is important as multiple
		// devices can be concurrently connected to one port
		// (like both a CRT and a TV)

		// primary port
		// having flat-panel support is most important
		if (tmp & 0x08)
			di->disp_type[0] = dt_dvi;
		else if (tmp & 0x4)
			di->disp_type[0] = dt_lvds;
		else if (tmp & 0x200)
			di->disp_type[0] = dt_tv_crt;
		else if (tmp & 0x10)
			di->disp_type[0] = dt_ctv;
		else if (tmp & 0x20)
			di->disp_type[0] = dt_stv;

		// secondary port
		// having TV-Out support is more important then CRT support
		// (CRT gets signal anyway)
		if (tmp & 0x1000)
			di->disp_type[1] = dt_ctv;
		else if (tmp & 0x2000)
			di->disp_type[1] = dt_stv;
		else if (tmp & 0x2)
			di->disp_type[1] = dt_crt;
		else if (tmp & 0x800)
			di->disp_type[1] = dt_dvi_ext;
		else if (tmp & 0x400)
			// this is unlikely - I only know about one LVDS unit
			di->disp_type[1] = dt_lvds;
	} else {
		// regular Radeon
		// TBD: no TV-Out detection
		di->disp_type[0] = dt_none;

		tmp = INREG( di->regs, RADEON_FP_GEN_CNTL);

		if( tmp & RADEON_FP_EN_TMDS )
			di->disp_type[0] = dt_dvi;
		else
			di->disp_type[0] = dt_crt;
	}

	SHOW_INFO( 1, "BIOS reports %s on primary and %s on secondary port",
		Mon2Str[di->disp_type[0]], Mon2Str[di->disp_type[1]]);

	// remove unsupported devices
	if( di->disp_type[0] >= dt_dvi_ext )
		di->disp_type[0] = dt_none;
	if( di->disp_type[1] >= dt_dvi_ext )
		di->disp_type[1] = dt_none;

	// HACK: overlays can only be shown on first CRTC;
	// if there's nothing on first port, connect
	// second port to first CRTC (proper signal routing
	// is hopefully done by BIOS)
	if( di->has_crtc2 ) {
		if( di->disp_type[0] == dt_none && di->disp_type[1] == dt_crt ) {
			di->disp_type[0] = dt_crt;
			di->disp_type[1] = dt_none;
		}
	}

	SHOW_INFO( 1, "Effective routing: %s on primary and %s on secondary port",
		Mon2Str[di->disp_type[0]], Mon2Str[di->disp_type[1]]);
}
*/


static bool Radeon_GetConnectorInfoFromBIOS ( device_info* di )
{

	ptr_disp_entity ptr_entity = &di->routing;
	int i = 0, j, tmp, tmp0=0, tmp1=0;

	int bios_header, master_data_start;

	bios_header = RADEON_BIOS16(0x48);

	if (di->is_atombios)
	{
		master_data_start = RADEON_BIOS16( bios_header + 32 );
		tmp = RADEON_BIOS16( master_data_start + 22);
		if (tmp) {
			int crtc = 0, id[2];
			tmp1 = RADEON_BIOS16( tmp + 4 );
			for (i=0; i<8; i++) {
				if(tmp1 & (1<<i)) {
					uint16 portinfo = RADEON_BIOS16( tmp + 6 + i * 2 );
					if (crtc < 2) {
						if ((i == 2) || (i == 6)) continue; /* ignore TV here */

						if ( crtc == 1 ) {
							/* sharing same port with id[0] */
							if ((( portinfo >> 8) & 0xf) == id[0] ) {
								if (i == 3)
									ptr_entity->port_info[0].tmds_type = tmds_int;
								else if (i == 7)
									ptr_entity->port_info[0].tmds_type = tmds_ext;

								if (ptr_entity->port_info[0].dac_type == dac_unknown)
									ptr_entity->port_info[0].dac_type = (portinfo & 0xf) - 1;
								continue;
							}
						}

						id[crtc] = (portinfo>>8) & 0xf;
						ptr_entity->port_info[crtc].dac_type = (portinfo & 0xf) - 1;
						ptr_entity->port_info[crtc].connector_type = (portinfo>>4) & 0xf;
						if (i == 3)
							ptr_entity->port_info[crtc].tmds_type = tmds_int;
						else if (i == 7)
							ptr_entity->port_info[crtc].tmds_type = tmds_ext;

						tmp0 = RADEON_BIOS16( master_data_start + 24);
						if( tmp0 && id[crtc] ) {
							switch (RADEON_BIOS16(tmp0 + 4 + 27 * id[crtc]) * 4)
							{
								case RADEON_GPIO_MONID:
									ptr_entity->port_info[crtc].ddc_type = ddc_monid;
									break;
								case RADEON_GPIO_DVI_DDC:
									ptr_entity->port_info[crtc].ddc_type = ddc_dvi;
									break;
								case RADEON_GPIO_VGA_DDC:
									ptr_entity->port_info[crtc].ddc_type = ddc_vga;
									break;
								case RADEON_GPIO_CRT2_DDC:
									ptr_entity->port_info[crtc].ddc_type = ddc_crt2;
									break;
								default:
									ptr_entity->port_info[crtc].ddc_type = ddc_none_detected;
									break;
							}

						} else {
							ptr_entity->port_info[crtc].ddc_type = ddc_none_detected;
						}
						crtc++;
					} else {
						/* we have already had two CRTCs assigned. the rest may share the same
						* port with the existing connector, fill in them accordingly.
						*/
						for ( j = 0; j < 2; j++ ) {
							if ((( portinfo >> 8 ) & 0xf ) == id[j] ) {
								if ( i == 3 )
								ptr_entity->port_info[j].tmds_type = tmds_int;
								else if (i == 7)
								ptr_entity->port_info[j].tmds_type = tmds_ext;

								if ( ptr_entity->port_info[j].dac_type == dac_unknown )
									ptr_entity->port_info[j].dac_type = ( portinfo & 0xf ) - 1;
							}
						}
					}
				}
			}

			for (i=0; i<2; i++) {
				SHOW_INFO( 2, "Port%d: DDCType-%d, DACType-%d, TMDSType-%d, ConnectorType-%d",
					i, ptr_entity->port_info[i].ddc_type, ptr_entity->port_info[i].dac_type,
					ptr_entity->port_info[i].tmds_type, ptr_entity->port_info[i].connector_type);
		    }
		} else {
			SHOW_INFO0( 4 , "No Device Info Table found!");
			return FALSE;
		}
	} else {
		/* Some laptops only have one connector (VGA) listed in the connector table,
		* we need to add LVDS in as a non-DDC display.
		* Note, we can't assume the listed VGA will be filled in PortInfo[0],
		* when walking through connector table. connector_found has following meaning:
		* 0 -- nothing found,
		* 1 -- only PortInfo[0] filled,
		* 2 -- only PortInfo[1] filled,
		* 3 -- both are filled.
		*/
		int connector_found = 0;

		if ((tmp = RADEON_BIOS16( bios_header + 0x50 ))) {
			for ( i = 1; i < 4; i++ ) {

				if (!(RADEON_BIOS16( tmp + i * 2 )))
					break; /* end of table */

				tmp0 = RADEON_BIOS16( tmp + i * 2 );
				if ((( tmp0 >> 12 ) & 0x0f ) == 0 )
					continue;     /* no connector */
				if (connector_found > 0) {
					if (ptr_entity->port_info[tmp1].ddc_type == (( tmp0 >> 8 ) & 0x0f ))
						continue;	/* same connector */
				}

				/* internal ddc_dvi port will get assigned to portinfo[0], or if there is no ddc_dvi (like in some igps). */
				tmp1 = (((( tmp0 >> 8 ) & 0xf ) == ddc_dvi ) || ( tmp1 == 1 )) ? 0 : 1; /* determine port info index */

				ptr_entity->port_info[tmp1].ddc_type = (tmp0 >> 8) & 0x0f;
				if (ptr_entity->port_info[tmp1].ddc_type > ddc_crt2)
					ptr_entity->port_info[tmp1].ddc_type = ddc_none_detected;
				ptr_entity->port_info[tmp1].dac_type = (tmp0 & 0x01) ? dac_tvdac : dac_primary;
				ptr_entity->port_info[tmp1].connector_type = (tmp0 >> 12) & 0x0f;
				if (ptr_entity->port_info[tmp1].connector_type > connector_unsupported)
					ptr_entity->port_info[tmp1].connector_type = connector_unsupported;
				ptr_entity->port_info[tmp1].tmds_type = ((tmp0 >> 4) & 0x01) ? tmds_ext : tmds_int;

				/* some sanity checks */
				if (((ptr_entity->port_info[tmp1].connector_type != connector_dvi_d) &&
				(ptr_entity->port_info[tmp1].connector_type != connector_dvi_i)) &&
				ptr_entity->port_info[tmp1].tmds_type == tmds_int)
				ptr_entity->port_info[tmp1].tmds_type = tmds_unknown;

				connector_found += (tmp1 + 1);
			}
		} else {
			SHOW_INFO0(4, "No Connector Info Table found!");
			return FALSE;
		}

		if (di->is_mobility)
		{
			/* For the cases where only one VGA connector is found,
			we assume LVDS is not listed in the connector table,
			add it in here as the first port.
			*/
			if ((connector_found < 3) && (ptr_entity->port_info[tmp1].connector_type == connector_crt)) {
				if (connector_found == 1) {
					memcpy (&ptr_entity->port_info[1],
						&ptr_entity->port_info[0],
							sizeof (ptr_entity->port_info[0]));
				}
				ptr_entity->port_info[0].dac_type = dac_tvdac;
				ptr_entity->port_info[0].tmds_type = tmds_unknown;
				ptr_entity->port_info[0].ddc_type = ddc_none_detected;
				ptr_entity->port_info[0].connector_type = connector_proprietary;

				SHOW_INFO0( 4 , "lvds port is not in connector table, added in.");
				if (connector_found == 0)
					connector_found = 1;
				else
					connector_found = 3;
			}

			if ((tmp = RADEON_BIOS16( bios_header + 0x42 ))) {
				if ((tmp0 = RADEON_BIOS16( tmp + 0x15 ))) {
					if ((tmp1 = RADEON_BIOS16( tmp0 + 2 ) & 0x07)) {
						ptr_entity->port_info[0].ddc_type	= tmp1;
						if (ptr_entity->port_info[0].ddc_type > ddc_crt2) {
							SHOW_INFO( 4, "unknown ddctype %d found",
								ptr_entity->port_info[0].ddc_type);
							ptr_entity->port_info[0].ddc_type = ddc_none_detected;
						}
						SHOW_INFO0( 4, "lcd ddc info table found!");
					}
				}
			}
		} else if (connector_found == 2) {
			memcpy (&ptr_entity->port_info[0],
				&ptr_entity->port_info[1],
					sizeof (ptr_entity->port_info[0]));
			ptr_entity->port_info[1].dac_type = dac_unknown;
			ptr_entity->port_info[1].tmds_type = tmds_unknown;
			ptr_entity->port_info[1].ddc_type = ddc_none_detected;
			ptr_entity->port_info[1].connector_type = connector_none;
			connector_found = 1;
		}

		if (connector_found == 0) {
			SHOW_INFO0( 4, "no connector found in connector info table.");
		} else {
			SHOW_INFO( 2, "Port%d: DDCType-%d, DACType-%d, TMDSType-%d, ConnectorType-%d",
				0, ptr_entity->port_info[0].ddc_type, ptr_entity->port_info[0].dac_type,
				ptr_entity->port_info[0].tmds_type, ptr_entity->port_info[0].connector_type);

		}
		if (connector_found == 3) {
			SHOW_INFO( 2, "Port%d: DDCType-%d, DACType-%d, TMDSType-%d, ConnectorType-%d",
				1, ptr_entity->port_info[1].ddc_type, ptr_entity->port_info[1].dac_type,
				ptr_entity->port_info[1].tmds_type, ptr_entity->port_info[1].connector_type);
		}

	}
	return TRUE;
}


// get flat panel info (does only make sense for Laptops
// with integrated display, but looking for it doesn't hurt,
// who knows which strange kind of combination is out there?)
static bool Radeon_GetBIOSDFPInfo( device_info *di )
{
	uint16 bios_header;
	uint16 fpi_offset;
	FPI_BLOCK fpi;
	char panel_name[30];
	int i;

	uint16 tmp;

	bios_header = RADEON_BIOS16( 0x48 );

	if (di->is_atombios)
	{
		int master_data_start;
		master_data_start = RADEON_BIOS16( bios_header + 32 );

		tmp = RADEON_BIOS16( master_data_start + 16 );
		if( tmp )
		{

		    di->fp_info.panel_xres		= RADEON_BIOS16( tmp +  6 );
		    di->fp_info.panel_yres		= RADEON_BIOS16( tmp + 10 );
		    di->fp_info.dot_clock		= RADEON_BIOS16( tmp +  4 ) * 10;
		    di->fp_info.h_blank			= RADEON_BIOS16( tmp +  8 );
		    di->fp_info.h_over_plus		= RADEON_BIOS16( tmp + 14 );
		    di->fp_info.h_sync_width	= RADEON_BIOS16( tmp + 16 );
		    di->fp_info.v_blank      	= RADEON_BIOS16( tmp + 12 );
			di->fp_info.v_over_plus		= RADEON_BIOS16( tmp + 18 );
		    di->fp_info.h_sync_width	= RADEON_BIOS16( tmp + 20 );
		    di->fp_info.panel_pwr_delay	= RADEON_BIOS16( tmp + 40 );

		    SHOW_INFO( 2, "Panel Info from ATOMBIOS:\n"
					"XRes: %d, YRes: %d, DotClock: %d\n"
					"HBlank: %d, HOverPlus: %d, HSyncWidth: %d\n"
					"VBlank: %d, VOverPlus: %d, VSyncWidth: %d\n"
					"PanelPowerDelay: %d\n",
					di->fp_info.panel_xres,	di->fp_info.panel_yres,	di->fp_info.dot_clock,
					di->fp_info.h_blank, di->fp_info.h_over_plus, di->fp_info.h_sync_width,
					di->fp_info.v_blank, di->fp_info.v_over_plus, di->fp_info.h_sync_width,
					di->fp_info.panel_pwr_delay	);

		}
		else
		{
		    di->fp_info.panel_pwr_delay = 200;
			SHOW_ERROR0( 2, "No Panel Info Table found in BIOS" );
			return false;
		}
	} // is_atombios
	else
	{

		fpi_offset = RADEON_BIOS16(bios_header + 0x40);

		if( !fpi_offset ) {
			di->fp_info.panel_pwr_delay = 200;
			SHOW_ERROR0( 2, "No Panel Info Table found in BIOS" );
			return false;
		}

		memcpy( &fpi, di->rom.rom_ptr + fpi_offset, sizeof( fpi ));

		memcpy( panel_name, &fpi.name, sizeof( fpi.name ) );
		panel_name[sizeof( fpi.name )] = 0;

		SHOW_INFO( 2, "Panel ID string: %s", panel_name );

		di->fp_info.panel_xres = fpi.panel_xres;
		di->fp_info.panel_yres = fpi.panel_yres;

		SHOW_INFO( 2, "Panel Size from BIOS: %dx%d",
			di->fp_info.panel_xres, di->fp_info.panel_yres);

		di->fp_info.panel_pwr_delay = fpi.panel_pwr_delay;
		if( di->fp_info.panel_pwr_delay > 2000 || di->fp_info.panel_pwr_delay < 0 )
			di->fp_info.panel_pwr_delay = 2000;

		di->fp_info.ref_div = fpi.ref_div;
		di->fp_info.post_div = fpi.post_div;
		di->fp_info.feedback_div = fpi.feedback_div;

		di->fp_info.fixed_dividers =
			di->fp_info.ref_div != 0 && di->fp_info.feedback_div > 3;


		// there might be multiple supported resolutions stored;
		// we are looking for native resolution
		for( i = 0; i < 20; ++i ) {
			uint16 fpi_timing_ofs;
			FPI_TIMING_BLOCK fpi_timing;

			fpi_timing_ofs = fpi.fpi_timing_ofs[i];

			if( fpi_timing_ofs == 0 )
				break;

			memcpy( &fpi_timing, di->rom.rom_ptr + fpi_timing_ofs, sizeof( fpi_timing ));

			if( fpi_timing.panel_xres != di->fp_info.panel_xres ||
				fpi_timing.panel_yres != di->fp_info.panel_yres )
				continue;

			di->fp_info.h_blank			= (fpi_timing.h_total - fpi_timing.h_display) * 8;
			// TBD: seems like upper four bits of hsync_start contain garbage
			di->fp_info.h_over_plus 	= ((fpi_timing.h_sync_start & 0xfff) - fpi_timing.h_display - 1) * 8;
			di->fp_info.h_sync_width 	= fpi_timing.h_sync_width * 8;
			di->fp_info.v_blank			= fpi_timing.v_total - fpi_timing.v_display;
			di->fp_info.v_over_plus 	= (fpi_timing.v_sync & 0x7ff) - fpi_timing.v_display;
			di->fp_info.v_sync_width 	= (fpi_timing.v_sync & 0xf800) >> 11;
			di->fp_info.dot_clock 		= fpi_timing.dot_clock * 10;
			return true;
		}
	} // not is_atombios

	SHOW_ERROR0( 2, "Radeon: couldn't get Panel Timing from BIOS" );
	return false;
}


// try to reverse engineer DFP specification from
// timing currently set up in graphics cards registers
// (effectively, we hope that BIOS has set it up correctly
//  and noone has messed registers up yet; let's pray)
static void Radeon_RevEnvDFPSize( device_info *di )
{
	vuint8 *regs = di->regs;

	di->fp_info.panel_yres =
		((INREG( regs, RADEON_FP_VERT_STRETCH ) & RADEON_VERT_PANEL_SIZE)
		>> RADEON_VERT_PANEL_SIZE_SHIFT) + 1;

	di->fp_info.panel_xres =
		(((INREG( regs, RADEON_FP_HORZ_STRETCH ) & RADEON_HORZ_PANEL_SIZE)
		>> RADEON_HORZ_PANEL_SIZE_SHIFT) + 1) * 8;

	SHOW_INFO( 2, "detected panel size from registers: %dx%d",
		di->fp_info.panel_xres, di->fp_info.panel_yres);
}


// once more for getting precise timing
static void Radeon_RevEnvDFPTiming( device_info *di )
{
	vuint8 *regs = di->regs;
	uint32 r;
	uint16 a, b;


	r = INREG( regs, RADEON_FP_CRTC_H_TOTAL_DISP );
	// the magic "4" was found by trial and error and probably stems from fudge (see crtc.c)
	a = (r & RADEON_FP_CRTC_H_TOTAL_MASK)/* + 4*/;
	b = (r & RADEON_FP_CRTC_H_DISP_MASK) >> RADEON_FP_CRTC_H_DISP_SHIFT;
	di->fp_info.h_blank = (a - b) * 8;

	SHOW_FLOW( 2, "h_total=%d, h_disp=%d", a * 8, b * 8 );

	r = INREG( regs, RADEON_FP_H_SYNC_STRT_WID );
	di->fp_info.h_over_plus =
		((r & RADEON_FP_H_SYNC_STRT_CHAR_MASK)
			  	>> RADEON_FP_H_SYNC_STRT_CHAR_SHIFT) - b/* - 1*/;
	di->fp_info.h_over_plus *= 8;
	di->fp_info.h_sync_width =
		((r & RADEON_FP_H_SYNC_WID_MASK)
				>> RADEON_FP_H_SYNC_WID_SHIFT);
	// TBD: this seems to be wrong
	// (my BIOS tells 112, this calculation leads to 24!)
	di->fp_info.h_sync_width *= 8;

	r = INREG( regs, RADEON_FP_CRTC_V_TOTAL_DISP );
	a = (r & RADEON_FP_CRTC_V_TOTAL_MASK)/* + 1*/;
	b = (r & RADEON_FP_CRTC_V_DISP_MASK) >> RADEON_FP_CRTC_V_DISP_SHIFT;
	di->fp_info.v_blank = a - b;

	SHOW_FLOW( 2, "v_total=%d, v_disp=%d", a, b );

	r = INREG( regs, RADEON_FP_V_SYNC_STRT_WID );
	di->fp_info.v_over_plus = (r & RADEON_FP_V_SYNC_STRT_MASK) - b;
	di->fp_info.v_sync_width = ((r & RADEON_FP_V_SYNC_WID_MASK)
		>> RADEON_FP_V_SYNC_WID_SHIFT)/* + 1*/;

	// standard CRTC
	r = INREG( regs, RADEON_CRTC_H_TOTAL_DISP );
	a = (r & RADEON_CRTC_H_TOTAL);
	b = (r & RADEON_CRTC_H_DISP) >> RADEON_CRTC_H_DISP_SHIFT;
	di->fp_info.h_blank = (a - b) * 8;

	SHOW_FLOW( 2, "h_total=%d, h_disp=%d", a * 8, b * 8 );

	r = INREG( regs, RADEON_CRTC_H_SYNC_STRT_WID );
	di->fp_info.h_over_plus =
		((r & RADEON_CRTC_H_SYNC_STRT_CHAR)
			  	>> RADEON_CRTC_H_SYNC_STRT_CHAR_SHIFT) - b;
	di->fp_info.h_over_plus *= 8;
	di->fp_info.h_sync_width =
		((r & RADEON_CRTC_H_SYNC_WID)
				>> RADEON_CRTC_H_SYNC_WID_SHIFT);
	di->fp_info.h_sync_width *= 8;

	r = INREG( regs, RADEON_CRTC_V_TOTAL_DISP );
	a = (r & RADEON_CRTC_V_TOTAL);
	b = (r & RADEON_CRTC_V_DISP) >> RADEON_CRTC_V_DISP_SHIFT;
	di->fp_info.v_blank = a - b;

	SHOW_FLOW( 2, "v_total=%d, v_disp=%d", a, b );

	r = INREG( regs, RADEON_CRTC_V_SYNC_STRT_WID );
	di->fp_info.v_over_plus = (r & RADEON_CRTC_V_SYNC_STRT) - b;
	di->fp_info.v_sync_width = ((r & RADEON_CRTC_V_SYNC_WID)
		>> RADEON_CRTC_V_SYNC_WID_SHIFT);
}

//snaffled from X.org hope it works...
static void Radeon_GetTMDSInfoFromBios( device_info *di )
{
    uint32 tmp, maxfreq;
    uint32 found = FALSE;
    int i, n;
    uint16 bios_header;

    bios_header = RADEON_BIOS16( 0x48 );

	for (i = 0; i < 4; i++) {
        di->tmds_pll[i].value = 0;
        di->tmds_pll[i].freq = 0;
    }

	if (di->is_atombios)
	{
		int master_data_start;
		master_data_start = RADEON_BIOS16( bios_header + 32 );

		if((tmp = RADEON_BIOS16 (master_data_start + 18))) {

		    maxfreq = RADEON_BIOS16(tmp + 4);

		    for (i = 0; i < 4; i++) {
				di->tmds_pll[i].freq = RADEON_BIOS16(tmp + i * 6 + 6);
				// This assumes each field in TMDS_PLL has 6 bit as in R300/R420
				di->tmds_pll[i].value = ((RADEON_BIOS8(tmp + i * 6 + 8) & 0x3f) |
				   ((RADEON_BIOS8(tmp + i * 6 + 10) & 0x3f) << 6) |
				   ((RADEON_BIOS8(tmp + i * 6 +  9) & 0xf) << 12) |
				   ((RADEON_BIOS8(tmp + i * 6 + 11) & 0xf) << 16));
				SHOW_ERROR( 2, "TMDS PLL from BIOS: %" B_PRIu32 " %" B_PRIx32,
				   di->tmds_pll[i].freq, di->tmds_pll[i].value);

				if (maxfreq == di->tmds_pll[i].freq) {
				    di->tmds_pll[i].freq = 0xffffffff;
				    break;
				}
		    }
		    found = TRUE;
		}
    } else {

		tmp = RADEON_BIOS16(bios_header + 0x34);
		if (tmp) {
		    SHOW_ERROR( 2, "DFP table revision: %d", RADEON_BIOS8(tmp));
		    if (RADEON_BIOS8(tmp) == 3) {
				n = RADEON_BIOS8(tmp + 5) + 1;
				if (n > 4)
					n = 4;
				for (i = 0; i < n; i++) {
					di->tmds_pll[i].value = RADEON_BIOS32(tmp + i * 10 + 0x08);
					di->tmds_pll[i].freq = RADEON_BIOS16(tmp + i * 10 + 0x10);
				}
				found = TRUE;
		    } else if (RADEON_BIOS8(tmp) == 4) {
		        int stride = 0;
				n = RADEON_BIOS8(tmp + 5) + 1;
				if (n > 4)
					n = 4;
				for (i = 0; i < n; i++) {
				    di->tmds_pll[i].value = RADEON_BIOS32(tmp + stride + 0x08);
				    di->tmds_pll[i].freq = RADEON_BIOS16(tmp + stride + 0x10);
				    if (i == 0)
				    	stride += 10;
				    else
				    	stride += 6;
				}
				found = TRUE;
		    }

		    // revision 4 has some problem as it appears in RV280,
		    // comment it off for now, use default instead
			/*
				else if (RADEON_BIOS8(tmp) == 4) {
				int stride = 0;
				n = RADEON_BIOS8(tmp + 5) + 1;
				if (n > 4) n = 4;
				for (i = 0; i < n; i++) {
					di->tmds_pll[i].value = RADEON_BIOS32(tmp + stride + 0x08);
					di->tmds_pll[i].freq = RADEON_BIOS16(tmp + stride + 0x10);
					if (i == 0)
						stride += 10;
					else
						stride += 6;
				}
				found = TRUE;
			}
			*/

		}
    }

    if (found == FALSE) {
    	for (i = 0; i < 4; i++) {
	        di->tmds_pll[i].value = default_tmds_pll[di->asic][i].value;
	        di->tmds_pll[i].freq = default_tmds_pll[di->asic][i].freq;
	        SHOW_ERROR( 2, "TMDS PLL from DEFAULTS: %" B_PRIu32 " %" B_PRIx32,
				di->tmds_pll[i].freq, di->tmds_pll[i].value);
    	}
    }
}

/*
// get everything in terms of monitors connected to the card
static void Radeon_GetBIOSMon( device_info *di )
{
	Radeon_GetMonType( di );

    // reset all Flat Panel Info;
    // it gets filled out step by step, and this way we know what's still missing
    memset( &di->fp_info, 0, sizeof( di->fp_info ));

    // we assume that the only fp port is combined with standard port 0
	di->fp_info.disp_type = di->disp_type[0];

	if( di->is_mobility ) {
		// there is a flat panel - get info about it
		Radeon_GetBIOSDFPInfo( di );

		// if BIOS doesn't know, ask the registers
		if( di->fp_info.panel_xres == 0 || di->fp_info.panel_yres == 0)
			Radeon_RevEnvDFPSize( di );

		if( di->fp_info.h_blank == 0 || di->fp_info.v_blank == 0)
			Radeon_RevEnvDFPTiming( di );

		SHOW_INFO( 2, "h_disp=%d, h_blank=%d, h_over_plus=%d, h_sync_width=%d",
			di->fp_info.panel_xres, di->fp_info.h_blank, di->fp_info.h_over_plus, di->fp_info.h_sync_width );
		SHOW_INFO( 2, "v_disp=%d, v_blank=%d, v_over_plus=%d, v_sync_width=%d",
			di->fp_info.panel_yres, di->fp_info.v_blank, di->fp_info.v_over_plus, di->fp_info.v_sync_width );
		SHOW_INFO( 2, "pixel_clock=%d", di->fp_info.dot_clock );
	}
}
*/

// get info about Laptop flat panel
static void Radeon_GetFPData( device_info *di )
{
    // reset all Flat Panel Info;
    // it gets filled out step by step, and this way we know what's still missing
    memset( &di->fp_info, 0, sizeof( di->fp_info ));

	// we only use BIOS for Laptop flat panels
	if( !di->is_mobility )
		return;

	// ask BIOS about flat panel spec
	Radeon_GetBIOSDFPInfo( di );

	// if BIOS doesn't know, ask the registers
	if( di->fp_info.panel_xres == 0 || di->fp_info.panel_yres == 0)
		Radeon_RevEnvDFPSize( di );

	if( di->fp_info.h_blank == 0 || di->fp_info.v_blank == 0)
		Radeon_RevEnvDFPTiming( di );

	SHOW_INFO( 2, "h_disp=%d, h_blank=%d, h_over_plus=%d, h_sync_width=%d",
		di->fp_info.panel_xres, di->fp_info.h_blank, di->fp_info.h_over_plus, di->fp_info.h_sync_width );
	SHOW_INFO( 2, "v_disp=%d, v_blank=%d, v_over_plus=%d, v_sync_width=%d",
		di->fp_info.panel_yres, di->fp_info.v_blank, di->fp_info.v_over_plus, di->fp_info.v_sync_width );
	SHOW_INFO( 2, "pixel_clock=%d", di->fp_info.dot_clock );
}


// Depending on card genertation, chipset bugs, etc... the amount of vram
// accessible to the CPU can vary. This function is our best shot at figuring
// it out. Returns a value in KB.
static uint32 RADEON_GetAccessibleVRAM( device_info *di )
{
	vuint8 *regs = di->regs;
	pci_info *pcii = &(di->pcii);

    uint32 aper_size = INREG( regs, RADEON_CONFIG_APER_SIZE );

    // Set HDP_APER_CNTL only on cards that are known not to be broken,
    // that is has the 2nd generation multifunction PCI interface
    if (di->asic == rt_rv280 ||
		di->asic == rt_rv350 ||
		di->asic == rt_rv380 ||
		di->asic == rt_r420  ) {
			OUTREGP( regs, RADEON_HOST_PATH_CNTL, RADEON_HDP_APER_CNTL,
		     ~RADEON_HDP_APER_CNTL);
	    SHOW_INFO0( 0, "Generation 2 PCI interface, using max accessible memory");
	    return aper_size * 2;
    }

    // Older cards have all sorts of funny issues to deal with. First
    // check if it's a multifunction card by reading the PCI config
    // header type... Limit those to one aperture size
    if (get_pci(PCI_header_type, 1) & 0x80) {
		SHOW_INFO0( 0, "Generation 1 PCI interface in multifunction mode"
				", accessible memory limited to one aperture\n");
		return aper_size;
    }

    // Single function older card. We read HDP_APER_CNTL to see how the BIOS
    // have set it up. We don't write this as it's broken on some ASICs but
    // we expect the BIOS to have done the right thing (might be too optimistic...)
    if (INREG( regs, RADEON_HOST_PATH_CNTL ) & RADEON_HDP_APER_CNTL )
        return aper_size * 2;

    return aper_size;
}


// detect amount of graphics memory
static void Radeon_DetectRAM( device_info *di )
{
	vuint8 *regs = di->regs;
	uint32 accessible, bar_size, tmp = 0;

	if( di->is_igp	) {
		uint32 tom;

		tom = INREG( regs, RADEON_NB_TOM );
		di->local_mem_size = ((tom >> 16) + 1 - (tom & 0xffff)) << 16;
		OUTREG( regs, RADEON_CONFIG_MEMSIZE, di->local_mem_size * 1024);
	} else {
		di->local_mem_size = INREG( regs, RADEON_CONFIG_MEMSIZE ) & RADEON_CONFIG_MEMSIZE_MASK;
	}

	// some production boards of m6 will return 0 if it's 8 MB
	if( di->local_mem_size == 0 ) {
		di->local_mem_size = 8 * 1024 *1024;
		OUTREG( regs, RADEON_CONFIG_MEMSIZE, di->local_mem_size);
	}


	// Get usable Vram, after asic bugs, configuration screw ups etc
	accessible = RADEON_GetAccessibleVRAM( di );

	// Crop it to the size of the PCI BAR
	bar_size = di->pcii.u.h0.base_register_sizes[0];
	if (bar_size == 0)
	    bar_size = 0x200000;
	if (accessible > bar_size)
	    accessible = bar_size;

	SHOW_INFO( 0,
		"Detected total video RAM=%" B_PRIu32 "K, "
		"accessible=%" B_PRIu32 "K "
		"(PCI BAR=%" B_PRIu32 "K)",
		di->local_mem_size / 1024,
		accessible / 1024,
		bar_size / 1024);
	if (di->local_mem_size > accessible)
	    di->local_mem_size = accessible;

	// detect ram bus width only used by dynamic clocks for now.
	tmp = INREG( regs, RADEON_MEM_CNTL );
	if (IS_DI_R300_VARIANT) {
		tmp &=  R300_MEM_NUM_CHANNELS_MASK;
		switch (tmp) {
			case 0: di->ram.width = 64; break;
			case 1: di->ram.width = 128; break;
			case 2: di->ram.width = 256; break;
			default: di->ram.width = 128; break;
		}
	} else if ( (di->asic >= rt_rv100) ||
				(di->asic >= rt_rs100) ||
				(di->asic >= rt_rs200)) {
		if (tmp & RV100_HALF_MODE)
			di->ram.width = 32;
		else
			di->ram.width = 64;
	} else {
		if (tmp & RADEON_MEM_NUM_CHANNELS_MASK)
			di->ram.width = 128;
		else
			di->ram.width = 64;
	}

	if (di->is_igp || (di->asic >= rt_r300))
	{
		uint32 mem_type = INREG( regs, RADEON_MEM_SDRAM_MODE_REG ) & RADEON_MEM_CFG_TYPE_MASK;
		if ( mem_type == RADEON_MEM_CFG_SDR) {
				// SDR SGRAM (2:1)
				strcpy(di->ram_type, "SDR SGRAM");
				di->ram.ml = 4;
				di->ram.MB = 4;
				di->ram.Trcd = 1;
				di->ram.Trp = 2;
				di->ram.Twr = 1;
				di->ram.CL = 2;
				di->ram.loop_latency = 16;
				di->ram.Rloop = 16;
				di->ram.Tr2w = 0;
		} else {  // RADEON_MEM_CFG_DDR
				// DDR SGRAM
				strcpy(di->ram_type, "DDR SGRAM");
				di->ram.ml = 4;
				di->ram.MB = 4;
				di->ram.Trcd = 3;
				di->ram.Trp = 3;
				di->ram.Twr = 2;
				di->ram.CL = 3;
				di->ram.Tr2w = 1;
				di->ram.loop_latency = 16;
				di->ram.Rloop = 16;
		}
	}

	SHOW_INFO( 1, "%" B_PRIu32 " MB %s found on %d wide bus",
		di->local_mem_size / 1024 / 1024, di->ram_type, di->ram.width);

/*	if( di->local_mem_size > 64 * 1024 * 1024 ) {
		di->local_mem_size = 64 * 1024 * 1024;

		SHOW_INFO0( 1, "restricted to 64 MB" );
	}*/
}


// map and verify card's BIOS to see whether this really is a Radeon
// (as we need BIOS for further info we have to make sure we use the right one)
status_t Radeon_MapBIOS( pci_info *pcii, rom_info *ri )
{
	char buffer[100];

	sprintf(buffer, "%04X_%04X_%02X%02X%02X bios",
		pcii->vendor_id, pcii->device_id,
		pcii->bus, pcii->device, pcii->function);

	// we only scan BIOS at legacy location in first MB;
	// using the PCI location would improve detection, especially
	// if multiple graphics cards are installed
	// BUT: BeOS uses the first graphics card it finds (sorted by
	// device name), thus you couldn't choose in BIOS which card
	// to use; checking the legacy location ensures that the card is
	// only detected if it's the primary card
	ri->phys_address = 0xc0000;
	ri->size = 0x40000;

	ri->bios_area = map_physical_memory( buffer, ri->phys_address,
		ri->size, B_ANY_KERNEL_ADDRESS, B_READ_AREA, (void **)&ri->bios_ptr );
	if( ri->bios_area < 0 )
		return ri->bios_area;

	ri->rom_ptr = Radeon_FindRom( ri );

	// on success, adjust physical address to found ROM
	if( ri->rom_ptr != NULL )
		ri->phys_address += ri->rom_ptr - ri->bios_ptr;

	return ri->rom_ptr != NULL ? B_OK : B_ERROR;
}


// unmap card's BIOS
void Radeon_UnmapBIOS( rom_info *ri )
{
	delete_area( ri->bios_area );

	ri->bios_ptr = ri->rom_ptr = NULL;
}


// get everything valuable from BIOS (BIOS must be mapped)
status_t Radeon_ReadBIOSData( device_info *di )
{
	shared_info dummy_si;
	status_t result = B_OK;

	// give Radeon_MapDevice something to play with
	di->si = &dummy_si;

	// don't map frame buffer - we don't know its proper size yet!
	result = Radeon_MapDevice( di, true );
	if( result < 0 )
		goto err1;

	Radeon_GetPLLInfo( di );

	// setup defaults
	di->routing.port_info[0].mon_type = mt_unknown;
	di->routing.port_info[0].ddc_type = ddc_none_detected;
	di->routing.port_info[0].dac_type = dac_unknown;
	di->routing.port_info[0].tmds_type = tmds_unknown;
	di->routing.port_info[0].connector_type = connector_none;

	di->routing.port_info[1].mon_type = mt_unknown;
	di->routing.port_info[1].ddc_type = ddc_none_detected;
	di->routing.port_info[1].dac_type = dac_unknown;
	di->routing.port_info[1].tmds_type = tmds_unknown;
	di->routing.port_info[1].connector_type = connector_none;

	if ( !Radeon_GetConnectorInfoFromBIOS( di ) )
	{
		di->routing.port_info[0].mon_type = mt_unknown;
		di->routing.port_info[0].ddc_type = ddc_none_detected;
		di->routing.port_info[0].dac_type = dac_tvdac;
		di->routing.port_info[0].tmds_type = tmds_unknown;
		di->routing.port_info[0].connector_type = connector_proprietary;

		di->routing.port_info[1].mon_type = mt_unknown;
		di->routing.port_info[1].ddc_type = ddc_none_detected;
		di->routing.port_info[1].dac_type = dac_primary;
		di->routing.port_info[1].tmds_type = tmds_ext;
		di->routing.port_info[1].connector_type = connector_crt;

	}
	Radeon_GetFPData( di );
	Radeon_GetTMDSInfoFromBios( di );
	Radeon_DetectRAM( di );

	Radeon_UnmapDevice( di );

err1:
	di->si = NULL;

	return result;
}